WebGang/CityGang

Nieuw?

We kopen een nieuwe harde schijf bij een officiële online winkel van electronica: intenso 0.5 T.

Aangesloten aan de computer, en gemount:

“This device has filesystem errors”

bcp4:~ # fsck.vfat -V -r /dev/sda1

fsck.fat 4.2 (2021-01-31)
There are differences between boot sector and its backup.
This is mostly harmless. Differences: (offset:original/backup)
65:01/00
1) Copy original to backup
2) Copy backup to original
3) No action
[123?q]? 3
Filesystem has 15258243 clusters but only space for 15258238 FAT entries.

smartctl -i /dev/sda

smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.15.8-1-default] (SUSE RPM)
Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5″ HDD MQ01ABD…
Device Model: TOSHIBA MQ01ABD050V
Serial Number: 89TPTH2FT
LU WWN Device Id: 5 000039 971c0ad1d
Firmware Version: AX0L1Q
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.5/5706
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Sep 6 22:23:23 2025 CEST
SMART support is: Available – device has SMART capability.
SMART support is: Enabled

Meer output van smart zie onderaan…

Bedrog
De verpakking heeft ergens in het klein staan “Certified Refurbished Hard Drive”, maar dat was niet zichtbaar bij aankoop!


smartctl -a /dev/sda
…

smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.15.8-1-default] (SUSE RPM)
Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5″ HDD MQ01ABD…
Device Model: TOSHIBA MQ01ABD050V
Serial Number: 89TPTH2FT
LU WWN Device Id: 5 000039 971c0ad1d
Firmware Version: AX0L1Q
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.5/5706
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Sep 6 22:34:09 2025 CEST
SMART support is: Available – device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status: (0×00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0×5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0×0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0×01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 114) minutes.
SCT capabilities: (0×003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0×000b 100 100 050 Pre-fail Always – 0
2 Throughput_Performance 0×0005 100 100 050 Pre-fail Offline – 0
3 Spin_Up_Time 0×0027 100 100 001 Pre-fail Always – 1439
4 Start_Stop_Count 0×0032 100 100 000 Old_age Always – 8
5 Reallocated_Sector_Ct 0×0033 100 100 050 Pre-fail Always – 0
7 Seek_Error_Rate 0×000b 100 100 050 Pre-fail Always – 0
8 Seek_Time_Performance 0×0005 100 100 050 Pre-fail Offline – 0
9 Power_On_Hours 0×0032 100 100 000 Old_age Always – 4
10 Spin_Retry_Count 0×0033 100 100 030 Pre-fail Always – 0
12 Power_Cycle_Count 0×0032 100 100 000 Old_age Always – 5
191 G-Sense_Error_Rate 0×0032 100 100 000 Old_age Always – 0
192 Power-Off_Retract_Count 0×0032 100 100 000 Old_age Always – 0
193 Load_Cycle_Count 0×0032 100 100 000 Old_age Always – 11
194 Temperature_Celsius 0×0022 100 100 000 Old_age Always – 26 (Min/Max 22/33)
196 Reallocated_Event_Count 0×0032 100 100 000 Old_age Always – 0
197 Current_Pending_Sector 0×0032 100 100 000 Old_age Always – 0
198 Offline_Uncorrectable 0×0030 100 100 000 Old_age Offline – 0
199 UDMA_CRC_Error_Count 0×0032 200 200 000 Old_age Always – 0
220 Disk_Shift 0×0002 100 100 000 Old_age Always – 0
222 Loaded_Hours 0×0032 100 100 000 Old_age Always – 0
223 Load_Retry_Count 0×0032 100 100 000 Old_age Always – 0
224 Load_Friction 0×0022 100 100 000 Old_age Always – 0
226 Load-in_Time 0×0026 100 100 000 Old_age Always – 179
240 Head_Flying_Hours 0×0001 100 100 001 Pre-fail Offline – 0

SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It “wraps” after 49.710 days.

Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
— – — – — – –
40 51 18 e8 95 f5 4b Error: UNC 24 sectors at LBA = 0×0bf595e8 = 200644072

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— – — – — – — – —————- ——————–
25 00 00 00 94 f5 40 00 00:01:12.854 READ DMA EXT
ef 03 45 00 00 00 00 00 00:01:12.339 SET FEATURES [Set transfer mode]
ef 02 00 00 00 00 00 00 00:01:12.339 SET FEATURES [Enable write cache]
e1 00 02 00 00 00 00 00 00:01:12.338 IDLE IMMEDIATE
ec 00 01 00 00 00 00 00 00:01:12.337 IDENTIFY DEVICE

Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
— – — – — – –
40 41 00 00 90 f5 40 Error: UNC at LBA = 0×00f59000 = 16093184

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— – — – — – — – —————- ——————–
60 00 08 00 94 f5 40 00 00:00:54.104 READ FPDMA QUEUED
60 00 00 00 90 f5 40 00 00:00:54.104 READ FPDMA QUEUED
60 00 08 00 e4 15 40 00 00:00:54.066 READ FPDMA QUEUED
60 00 00 00 e0 15 40 00 00:00:54.066 READ FPDMA QUEUED
60 00 08 00 f4 82 40 00 00:00:54.037 READ FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0×0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information – try ’smartctl -x’ for more